260ci Wia Driver Windows 10
The issue is seen when the Windows Image Acquisition (WIA) scan driver is installed on: Windows 10 (32-bit and 64-bit) Windows 7 or Windows 8.1 systems that are upgraded to Windows 10.
The Code 10 error is one of several Device Manager error codes. It's generated when Device Manager can't start the hardware device, a situation usually caused by outdated or corrupted drivers.
Device Manager Error Code 10
A device may also receive a Code 10 error if a driver generates an error that Device Manager doesn't understand. In other words, a Code 10 error can sometimes be a very generic message indicating some kind of unspecified driver or hardware problem.
The Code 10 error will almost always display in the following way:
Details on Device Manager error codes like Code 10 are available in the Device Status area in the device's properties. See How to View a Device's Status in Device Manager for help.
The Code 10 error could apply to any hardware device in Device Manager, though most Code 10 errors appear on USB and audio devices.
260ci Wia Driver Usb Code 10 Fix
Any of Microsoft's operating systems could experience a Code 10 Device Manager error including Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, and more.
Important:Device Manager error codes are exclusive to Device Manager. If you see the Code 10 error elsewhere in Windows, chances are it's a system error code or software-specific error, which you should not troubleshoot as a Device Manager issue.
How to Fix a Code 10 Error
Restart your computer if you haven't done so already.
There is always the chance that the error Code 10 you're seeing on a device was caused by some temporary problem in Device Manager or with the hardware. If so, a reboot, like in many situations, might fix the Code 10 error.
Did you install a device or make a change in Device Manager just before the Code 10 error appeared? If so, it's possible that the change you made caused the Code 10 error.
Undo the change if you can, restart your PC, and then check again for the Code 10 error.
Depending on the changes you made, some solutions might include:
- Removing or reconfiguring the newly installed device
- Rolling back the driver to a version prior to your update
- Using System Restore to undo recent Device Manager related changes
- Reinstall the drivers for the device. Uninstalling and then reinstalling the drivers for the device is a likely solution to a Code 10 error.
If a USB device is generating the Code 10 error, uninstall every device under the Universal Serial Bus controllers hardware category in Device Manager as part of the driver reinstall. This includes any USB Mass Storage Device, USB Host Controller, and USB Root Hub.
Properly reinstalling a driver, as in the instructions linked above, is not the same as simply updating a driver. A full driver reinstall involves completely removing the currently installed driver and then letting Windows install it over again from scratch.
Update the drivers for the device. It's also very possible that installing the latest drivers for the device could correct the Code 10 error, even if these drivers were previously functional.
If this works, it means that the stored Windows drivers you reinstalled in Step 3 were either a) damaged, or b) outdated with a problem that the more up-to-date drivers corrected.
Be sure to check for the latest drivers from your computer and device manufacturer (if applicable) since one may have a more recent driver available than the other.
Install the latest Windows service pack. Microsoft often releases service packs and other patches for Windows, one of which might contain a fix for the Code 10 error.
Delete the UpperFilters and LowerFilters values in the registry. Two particular values in the Windows Registry could be corrupted, causing the Code 10 error.
While this isn't a very common solution to a Code 10 issue, it is for many other Device Manager error codes. Don't be afraid to try this if the previous ideas haven't worked.
Try an older driver version, or one for the previous version of Windows. Almost all manufacturers continue to provide previously available drivers on their websites.
This trick doesn't work to fix Code 10 errors very often, and when it does, it probably means that the latest driver provided by the manufacturer has serious problems, but it's worth a shot before trying the next few steps.
Try using DriverHub to install an older driver if you can't find it on the manufacturer's website.
Purchase a poweredUSB hub if the Code 10 error is showing up for a USB device.
Some USB devices require more power than the USB ports in your computer can give it. Plugging those devices into a powered USB hub circumvents that issue.
Replace the hardware. A problem with the hardware device itself might be causing the Code 10 error, in which case replacing the hardware is your next logical step.
Another possibility, while not very likely, is that the device is not compatible with your version of Windows. You can always check the Windows HCL to be sure.
If you're positive that a hardware problem isn't causing the Code 10 error, you could try a repair install of Windows. If that doesn't work, try a clean install of Windows. I don't recommend doing either before you replace the hardware, but you may have to give them a try if you're out of other options.
Please let me know if you've fixed a Code 10 error using a method that I don't have above. I'd like to keep this page as accurate as possible.
Need More Help?
Install 260ci Wia Driver Windows 10
If you don't want to fix the Code 10 problem yourself, see How Do I Get My Computer Fixed? for a full list of your support options, plus help with everything along the way like figuring out repair costs, getting your files off, choosing a repair service, and a whole lot more.
